Electric Door Entry Systems


Selecting The Right Door Entry Lock For Your Building

It’s essential to understand how to select the ideal lock system for your building development. The electrical entrance lock system is a unit fitted in the entrance to regulate a door opening electronically. In this post, we reveal the various choices of electric power locks and additionally locking devices to stay away from. As with all electrical work it is best to employ a qualified electrician or Edinburgh locksmith to install any sort of security system

Mechanism Releases Depending On The Entrance Type

Electronic locks are employed to guard doors, exit points and public entrances. Basically, to provide security doors. Prior to selecting a door lock, it is advisable to consider the components of the door construction. Various issues can be prevented by making the best choice when referring to door security systems.

Based on the entrance locking device

The initial component that must be planned is if the entrance has a level lock or flat area lock to select the appropriate electric lock.

Should the entrance incorporate a lock?

If the entrance has a lock, an effective choice would be to set up an electrical lock discharge system with an extended guard. By setting up an EU DIN style lock system, the security grade of the entrance will be enhanced when it’s secured.

metal-entry-button-unitsDoor and Entryway Construction

Prior to selecting an electronic lock release, it’s usually required to examine the door construction material: metal, composite or timber frame for instance.

Design Of Doorway

Based on the kind of entrance where an electronic lock will be mounted, also choose whether it will be set up in:

  • Emergency doorways: A lock system with increased technologies is advisable to work with emergency panic units.
  • Large doors of metal: These doorways face increased levels of traffic, consequently, it’s advisable to use lock systems of greater strength to damage.
  • External entrances (gates): To avoid the introduction of moisture and dust, it’s recommended to add water-resistant lock produces.
  • Fire resistant doors: There are unique flameproof lock products.
  • Glass entrances: These entrances are typically made use of in commercial buildings. They possess certain lock systems.

Is It Important To Include Alerts On The Entrance?

Electronic lock systems deliver multiple benefits. Most notable, is they show if the entrance is shut or opened by way of a small electronic switch in the lock that senses it automatically. These remote access systems provide countless uses for secure installations, entry regulation systems and security alarms. If we need an entrance to have this feature, we must select the correct door security system.

After you have planned the components of the entrance where you need to fit an electronic lock system, we will be in a position to recognise other important areas such as the degree of security, electrical power components needed or signals.

Electronic door system trigger depending on degree of security necessary

Initially, we must consider the strength of lock systems available. It’s recommended to distinguish between traditional or strengthened resistance.

The variations are primarily the effect a lock system is are to resistance. Normal resistance allows damage up to 260 kg-f, and it handles important safety requirements either in external and internal purposes. The strengthened resistance aids damage of 900 kg-f. Strengthened lock systems are applied in busy entrance areas and heavy metal entrances.

emergency-door-entryWhat kind of electrical supply is needed for a security lock system

The energy supply is an additional feature to consider when selecting an electronic lock. It relies upon on the lock system.

DC power: constant and quiet installation.
AC energy installation: it’s usually loud, and it has a greater energy usage. Better performance in entrances subjected to any kind of force.
Multiple currents: maintains either form of power and it is best for maximum efficiency usage.

Looking Past Your Standard Door Security

Electronic security systems offer unlimited solutions. For an ideal system procedure, it’s essential to identify the best lock system for your build development. You shouldn’t overlook that a door lock system must be selected by taking into account the kind of entryway, kind of lock as well as the construction material of the doorway and where it will be mounted.

Wired Or Wireless Intruder Alarms

Wireless Alarm System

Choosing between a Wireless or Wired System

Do-it-yourself intruder alarms come in a wired or wireless setup. Wired security systems can be a little complicated to set up as you’ll require running, cables from every sensor the whole way back to the main controller device.
Each kind of setup normally uses a range of sensors. These both acknowledge either motion or are activated if a magnetised contact is interrupted – when anyone enters a room or area, for instance.

Connection sensors

These secure, insecure access areas such as the rear and main entrance ways and lower level window openings. Figure out the amount you’ll require.

Passive Infrared (PIR) motion sensors

Passive Infrared sensors are set off by a person’s heat and motion. They are ideal for protecting spacious points within your building. But the sensors may not be proper for entrances and window openings as they can be activated by individuals or pets moving outside.
Locate passive infrared sensors, so the beam doesn’t target at a screen, light fixture or heated appliances like electric fires – this will trigger them off.
Confirm devices protect an adequate area for the locations you need to secure.

Controller Unit

Many controller units require a mains electrical supply, with an extra power supply in situations of power cuts.
Choose an Interfere-proof unit, so the security system is triggered if a burglar attempts to disarm it. And make certain young ones can not touch the entry pad!

Alarm Unit

Give intruders a load and clear message: install the security unit to the entrance of your building or anywhere that’s absolutely clear to anyone passing by. But locate it at the correct height so no one can make contact with it.
If burglars can get to your house from the rear, place another alarm unit so they can clearly see it.

Things to think about

Determine how many weak access areas your building has.
Ascertain how many passive infrared sensors you’ll require. Searching for a plan of your building will assist you to choose.
Locate entranceway and window sensors on your main and rear entrances and freely attainable lower windows.
Have animals? Passive Infrared sensors can be activated by animals near the sensors, so select a suitable unit or purchase just entrance and window sensors.
Setup an alarm unit on the entrance of your building so it can quickly be spotted. If you’ve a bigger property, you may wish to fit another alarm unit on an additional wall.
Certain alarms have a zone controller so you can program the alarm to trigger only from particular levels or entry areas. This is helpful if you need to protect the lower floors of your house with your alarm so you can move freely upstairs while not triggering the alarm system.
More advanced alarms will contact telephone contacts you’ve currently set up when the system is triggered. This allows you to respond immediately when you’re away from the property.
For outhouses and garden sheds, individual and single point systems can be excellent against intruders.

Tips and tricks

Position your security system controller unit at the correct height so children can’t make contact with it!
GSM Phone Card Alarm System

Fitting a wireless system

These tips will assist you to set up your alarm properly:

Place the controller unit close to a mains outlet and nearby a phone point if your alarm has the telephone contact feature. Ensure that you’re able to reach it comfortably when you are going into and exiting your property. But be careful that nobody can observe the controller unit from outside the building.
Passive Infrared sensors and entrance and window devices work well when they are inside of 25m of the controller unit. Do not attach them close to metallic things or near to sources of electric interference like kitchen appliances.

Locate Passive Infrared sensors 2m-3m higher than ground level. Position in the corner of a room for the greatest coverage. The ideal locations for Passive Infrared sensors are halls and living rooms, where entrance and window sensors are not being employed. Do not place them adjacent to windows – anyone passing can trigger it. Places of high temperature can additionally set them off. And do not put close to obstacles such as window curtains and furniture.
Put entrance and window sensors at the top of the door or window inside the frame. The device should be secured to the entrance or window, with the detector secured to the framework.

Here is a short advice guide to setting up a wireless alarm. But stick to the maker’s guidelines for the system you’re setting up.

1. Confirm you have received all the apparatus: controller unit, an alarm (alarm unit), Passive Infrared sensors and entrance and window sensors.

2. Prior to mounting or programming the security system, initialize the battery packs in the detectors.

3. Then switch on the controller unit by inserting the power plug. Also, initialize the battery if your alarm has one.

4. You can now initialize your alarm and operate the sensors and alarms with the controller unit.

For details, see the manufacturer’s instructions. Call our office for more help and advice in Alarm Systems